Products

Note* for Winchester 70-35, if your gun did not come with a factory suppressor, use this adapter. If it did come with a factory suppressor we would have to make a custom adapter. Features:  Made by CNC for accuracy Material is 6061 T6 Aluminum Matte black anodize Diamond pattern knurling for easy grip Compatible with .357 and .45 model

Need to make the fat boy quieter? You can add this 3 inch extender to capture more air and reduce the muzzle blast some more.  Features: 6061 T6 Aluminum Black anodize Matching outer tube design to the fat boy Also compatible with the Ronin and Emperor

This muzzle brake or air stripper screws onto the front of the fat boy.  Note: This unit does not come with the individual air strippers. You can change the caliber size by using the inserts that was included with the fat boy. Features: Made of aluminum 6061 T6 Black anodize Weights 2.9 oz Add the optional 3 inch extender for the fatboy to make it quieter!Extender

Negro/rojo con logotipo de parche de goma negro/blanco.Tela: Paneles frontales y visera 100% algodón, paneles central y posterior 100% poliéster.Estructura: EstructuradaPerfil: AltoCierre: broche ajustable de 7 posiciones

This adapter will extend the shroud past the air tube allowing you to screw on any suppressor with 1/2 x 20 female threads. Female side is M20x1 and male 1/2 x 20. Features: Matte Black anodize Knurled thread protector 95mm long

Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Matte Black anodize Knurled thread protector

Note: If you need a shroud extender for your 600mm FX Impact to work with the Saber Tactical TRS rail, you'll need this adapter: A101 This adapter is for Impacts and Wildcats that have the M20x1 male threaded end. It will screw onto your factory shroud and allow you to screw on an LDC with a 1/2 x 20 UNF Female threads. Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Matte Black anodize Knurled thread protecton

This adapter adds .75 inches to the FX shroud. Female 1/2 x 20 to Male 1/2 x 20 Features: 6061 T6 aluminum length .75 inches Includes thread protector Black anodize Weights: 1.5oz 28MM outer diameter

This adapter adds 2.5 inches to the FX shroud. Features: 6061 T6 aluminum length 2.5 inches Includes thread protector Black anodize Weights: 3.7oz 28mm outer diameter

These adapters are for Wildcat shrouds that extend past the air tube and has female threads once you remove the front shroud cap. It is also compatible with FX Royale 400/500, Boss and Whisper. This adapter is Male to Male, one side is M20x1 that goes into the shroud and the other end is 1/2 x 20 UNF. Features Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip *Note if you have a newer Wildcat, this is not the correct adapter. You will need this one instead: https://donnyfl.com/collections/adapters/products/fx-impact-wildcat-1-2-x-20-unf-adapter-matte-finish-with-thread-protector

This shroud extension is for shrouds that sits behind the lower air tube. Female side is M20x1 and male 1/2 x 20. Features Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize 44mm long

Spare rear caps for the FX/DonnyFL suppressors.

*Please note: Take the front cap off your shroud, measure the outer diameter of the threads on the cap. If close to 1.4 inches, use this adapter. Features:  Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

This adapter allows you to screw on an airgun suppressor with 1/2 x 20 threads.  I recommend going with the Ronin 1/2 x 20 with this gun. I have it installed on my personal gun and it works flawlessly. However, results may vary and might need modification to work in semi auto mode. This gun is similar to the Bullmaster and others have been able to fix the issue by replacing the spring. Go to your hardware store and look for a lighter spring. I got mine from Ace hardware and it fixed the magazine indexing issue. Features:  Compatible up to .30 caliber Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

1/2 x 20 UNF adapter for those rapid firing Bullmaster. New and improve design to allow more air flow. Please note that when you add a suppressor to this gun, it does not properly index the magazine. It uses blowback air to advance the magazine however with a suppressor on, it over rotates and causes it to not properly index. If you plan to single load it'll work fine. Some customers have been able to get the gun to work properly by swapping out the spring inside the shroud with a different strength one. Will take trial an error. Similar to the Blitz, this guy may need a lighter spring to work with a suppressor. I got mine from Ace hardware. See picture Features:  Compatible up to .30 caliber Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

Key Features: Double-Sided Male Adapter: Specifically designed for Hatsan Jet 1 and Hatsan Jet 2 airguns. Easy Installation: Features through holes in the threads for easy tightening or loosening. High-Quality Construction: Matte black anodized threads ensure durability and a sleek appearance. Precise Dimensions: Outer diameter of .655 inches (16.6 mm).