When silence is a priority

The best on the planet

1.22 x 5 inches TANTO
1.22 x 5 inches TANTO $ 2,068.00
Tanto had been the missing member of the DonnyFL collection. It's a shorter version of the KOI but don't let the size fool you, it does really well even on high powered guns.  Click here to add additional endcaps Features: Available in .177/.22, .22/.25, and .25/.30 Mono-core design Precision CNC’ed by professional machinist Sand blasted and anodized for maximum durability Swappable rear end caps for 1/2 x 20 Bolt, FX (M20x1) Bolt ,1/2 x 20 Cone, Vulcan M14x1.25 and Diana Skyhawk M12x1.25 Comes pre-wrapped in felt Machined grooves on the outside for easy handling Tanto with cone end cap is 5.37 inches long Comes with protective red tube for easy transport and storage. Weight:  1. With 1/2 x 20 Bolt rear end cap: 3.9 oz2. With 1/2 x 20 Cone rear end cap: 4.1 oz3. With M20x1 Bolt rear end cap: 3.5 oz *Airgun use only, will not ship outside Mexico *International Customers, please be aware that if you add this to your cart, there will not be an option to ship your items. If you have other items that are non-restricted, they won't show up either until you remove the restricted item from your cart. *Return Policy
1.6 x 7.25 YOKOZUNA
1.6 x 7.25 YOKOZUNA $ 4,176.00
Introducing DonnyFL’s new Quick Disconnect moderators. These precision-engineered moderators feature a quick detach system, ensuring consistent shooting performance with no point-of-impact changes after detaching and re-attaching. These moderators are caliber specific compared to previous versions. Crafted from high-grade aluminum, they’re robust and modular to adapt to your shooting needs. We also offer replacement rear caps for current moderators to transform them into QD.FEATURES: Indexed locking system for consistent position and no point of impact changes. Quick detachment for easy storage and reattachment for shooting. Comes with a 1/2 x 20 female (barrel/shroud) thread adapter. Modular design for length adjustment. Crafted from 6061 T6 aluminum (individual sections) and 7075 aluminum (main QD housing and adapter). Quick disconnect rear is available for the following moderators. (EMPEROR, SUMO, RONIN, SHOGUN, FX, TANTO, TATSU, KOI, FATBOY 2.0) YOKOZUNA: The Yokozuna or sumo grand champion, has the same outer diameter as our Sumo 40.46mm or 1.6 inches.
1.6 x 6.25 inch SUMO
1.6 x 6.25 inch SUMO $ 3,132.00
This will be your favorite LDC. Why Sumo? Rear endcaps are swappable and available in different thread types Mono-core design to increase accuracy & limit the chances of pellet clipping No moving parts or epoxy that may become loose after 1000's of rounds Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch needed when you want to perform maintenance inside the unit. Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. Weight 5.6 oz Comes with protective red tube for easy transport and storage. For additional rear cap threads go here *Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. *Airgun use only, will not ship outside of the US *International Customers, please be aware that if you add this to your cart, there will not be an option to ship your items. If you have other items that are non-restricted, they won't show up either until you remove the restricted item from your cart. *Return Policy
1.6 X 4.25 inches TATSU
1.6 X 4.25 inches TATSU $ 2,715.00
Tatsu, or Dragon in Japanese, will be a great addition for shooters who need to take the bark out of their gun yet keep the overall length short. This is a smaller version of the popular Sumo.  Features: Available in .177/.22, .22/.25 and .25/.30 Mono-core design to increase accuracy and limit the chances of pellet clipping Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch needed to perform maintenance. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. Weight is just 4.1 oz Comes with protective red tube for easy transport and storage. For additional rear cap threads go here. *Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. *Airgun use only, will not ship outside of Mexico *International Customers, please be aware that if you add this to your cart, there will not be an option to ship your items. If you have other items that are non-restricted, they won't show up either until you remove the restricted item from your cart. *Return Policy

Pcp airgun adapters

.357/.45/.50 AEA Challenger / .357/.45/.50 AEA HP MAX A91
.357/.45/.50 AEA Challenger... $ 836.00
This adapter is compatible with the .357/.45/50 big bore SIDE LEVER AEA Challenger as well as the .357/.45/.50 AEA HP SS Max.  Features: M18x1 male threads 6061 T6 Aluminum Anodized Knurled thread protector
1/2 x 20 Double Male Adapter / Air Arms S510 Adapter A21
1/2 x 20 Double Male Adapte... $ 836.00
Features: Any gun that needs a double sided male adapter One side has knurled cap Has through hole in the threads for easy tightening or loosening Matte Black Anodize .79 inches / 20 mm OD Great for Air Arms 
10mm, 11mm, 12mm, 14mm, 15mm and 16mm Slide On Adapter with 1/2 x 20 UNF
10mm, 11mm, 12mm, 14mm, 15m... $ 940.00
Have an airgun that does not have a shroud and would like to be able to add an airgun moderator? These slide-on adapters work on airguns with barrel sizes 10mm, 11mm, 12mm, 14mm, 15mm, and 16mm. Features:  Compatible with .177 to .25 Made by CNC for accuracy The material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip It comes with M4 set screws It uses 2mm Allen keys the A56 version is made of steel instead of aluminum 
AEA Challenger .30 and .357 Bolt Action Adapter
AEA Challenger .30 and .357... $ 836.00
Please note if your gun is the side lever version, you'll need this adapter instead https://donnyfl.com/products/45-50-aea-challenger-345-aea-hp-ss-max?_pos=1&_sid=a77757bc5&_ss=r Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Comes with knurled thread protector For .30 caliber measure the OD of the threaded part of the front cap. It should be close to 28mm. May need to heat up the front cap with a heat gun or mini torch to loosen the thread locker.