Taipan Veteran Shroud Adapt...
$ 1,220.00
This adapter will screw into the Mutant OEM shroud. Has 1/2 x 20 UNF male threads that allows you to screw on any 1/2 x 20 female threaded LDCs.
Features:
Made by CNC for accuracy
Material is 6061 T6 Aluminum
Black anodize
Cap with diamond pattern knurling for easy grip
Taipan Veteran Speed Dialer...
$ 1,220.00
Look ma no tools! You don't need the prongs or hex key whenever you want to adjust your spring tension. Loosen the side thumb screw to adjust the HST in or out with ease. Once you're done, tighten back the side screw.
Features:
CNC parts
Has a through hole in the back in case the spring tension is too much, you can use a hex key or thin screw driver to help turn
Black anodize to add character to your gun
Package includes side thumb screw and HST adjuster
TANTO Morador
$ 2,415.00
Tanto had been the missing member of the DonnyFL collection. It's a shorter version of the KOI but don't let the size fool you, it does really well even on high powered guns. Click here to add additional endcaps
Features:
Available in .177/.22, .22/.25, and .25/.30
Mono-core design
Precision CNC’ed by professional machinist
Sand blasted and anodized for maximum durability
Swappable rear end caps for 1/2 x 20 Bolt, FX (M20x1) Bolt ,1/2 x 20 Cone, Vulcan M14x1.25 and Diana Skyhawk M12x1.25
Comes pre-wrapped in felt
Machined grooves on the outside for easy handling
Tanto with cone end cap is 5.37 inches long
Comes with protective red tube for easy transport and storage.
Weight:
1. With 1/2 x 20 Bolt rear end cap: 3.9 oz2. With 1/2 x 20 Cone rear end cap: 4.1 oz3. With M20x1 Bolt rear end cap: 3.5 oz
*Airgun use only, will not ship outside Mexico
*International Customers, please be aware that if you add this to your cart, there will not be an option to ship your items. If you have other items that are non-restricted, they won't show up either until you remove the restricted item from your cart.
*Return Policy
TATSU Moderador
$ 3,170.00
Tatsu, or Dragon in Japanese, will be a great addition for shooters who need to take the bark out of their gun yet keep the overall length short. This is a smaller version of the popular Sumo.
Features:
Available in .177/.22, .22/.25 and .25/.30
Mono-core design to increase accuracy and limit the chances of pellet clipping
Precision CNC'd by professional machinist
Sand blasted and anodized for maximum durability
Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch needed to perform maintenance.
Comes pre-wrapped in felt
Machined grooves on the outside for easy handling.
Weight is just 4.1 oz
Comes with protective red tube for easy transport and storage.
For additional rear cap threads go here.
*Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings.
*Airgun use only, will not ship outside of Mexico
*International Customers, please be aware that if you add this to your cart, there will not be an option to ship your items. If you have other items that are non-restricted, they won't show up either until you remove the restricted item from your cart.
*Return Policy
Umarex Gauntlet 1/2 x 20 Ad...
$ 975.00
This adapter screws into the OEM shroud. Replaces the original front cap.
Features:
Comes with knurled cap
CNC
Matte black anodize
Other things to consider:
Gauntlet Aluminum Air Stripper
**NOT COMPATIBLE WITH THE .30 CAL GAUNTLET 2
Umarex Gauntlet Aluminum Ai...
$ 251.00
This piece replaces the OEM plastic air stripper. This will help in the long run as the plastic ones tend to crack. It includes o-ring.
Features:
6061 Aluminum
Matte black anodize
Other things to consider:
Gauntlet 1/2 x 20 adapter
Gauntlet short shroud with 1/2 x 20 adapter
**NOT COMPATIBLE WITH THE .30 CAL GAUNTLET 2
Umarex Gauntlet Short Shrou...
$ 1,253.00
This shroud is 3 inches shorter than OEM. I removed the plastic baffle that came with the gun and added a 1/2 x 20 adapter. This allows you to put a bigger suppressor in the front and make this gun super quiet. I highly recommend the Tatsu. All you will hear is the hammer spring. Overall length is 23 inches.
You will need the OEM spring.
Features:
23 inches overall
CNC
Matte black anodize
Other things to consider:
Gauntlet Aluminum Air Stripper
Directions:1. Remove the factory shroud by turning the shroud counter clockwise2. You won't need the factory black baffle but hang on to the spring3. Remove factory air stripper by pulling it off4. Put the o'ring onto the DonnyFL air stripper5. Slide the air stripper onto the barrel6. Take the short shroud and drop the factory spring down the shroud towards the side that has the adapter7. Apply some silicone grease onto the air stripper o'ring8. Slide short shroud over the barrel, once you're at threaded part in the rear, turn clockwise to tighten.To install a suppressor, remove the thread protector from the shroud. Screw on the suppressor.
Very important that you include the factory spring, it holds the air stripper in place. Without it, the stripper will fall off and block the exit hole.
*Return Policy
**NOT COMPATIBLE WITH THE .30 CAL GAUNTLET 2
Umarex Hammer M18x1 Shroud ...
$ 975.00
This adapter replaces the factory shroud baffle and has M18x1 threads. Comes with thread protector
Instructions:
remove the factory shroud by grabbing onto the shroud by the front cap. When you turn the shroud counter clockwise, that should loosen the front cap. The shroud is free floating, there are no threads in it. Important thing is to remove the front cap.
once shroud is off, put a few drops of red loctite onto the barrel thread.
put the shroud back on
now take new shroud adapter and tighten onto barrel. Let it dry for a few minutes
remove thread protector on shroud adapter to screw on an airgun suppressor with M18x1 threads.
Uragan King 1/2 x 20 Adapte...
$ 975.00
Features:
6061 Aluminum
1/2 x 20 male threads
Black Anodized
Thread Protector
compatible up to 30 caliber
Will not work if your baffle looks like the one in the picture below.
Western Airguns Rattler .30...
$ 975.00
This adapter is compatible with the .30 Western Airguns Rattler. The Rattler .30 is a 17-shot fully and semi-automatic big-bore air rifle.
***THIS WILL NOT FIT ON THE SIDEWINDER***
We're currently working on a prototype for the Sidewinder.
Features:
1/2x20 male threads
6061 T6 Aluminum
Anodized
Knurled thread protector
Western Airguns Rattler .35...
$ 975.00
This adapter is compatible with the .357 Western Airguns Rattler. The Rattler .357 is a 15-shot semi-automatic big-bore air rifle.
Features:
M18x1 male threads
6061 T6 Aluminum
Anodized
Knurled thread protector
YOKOZUNA Moderador
from $ 4,510.00
CARACTERÍSTICAS:
Sistema de bloqueo indexado para una posición consistente y sin cambios en el punto de impacto.Desmontaje rápido para un fácil almacenamiento y remontaje para disparar.Viene con un adaptador de rosca hembra 1/2 x 20 Diseño modular para ajustar la longitud.Fabricado en aluminio 6061 T6 (secciones individuales) y aluminio 7075 (carcasa principal QD y adaptador).La parte trasera de desconexión rápida está disponible para los siguientes moderadores. (EMPERADOR, SUMO, RONIN, SHOGUN, FX, TANTO, TATSU, KOI, FATBOY 2.0)
ADVERTENCIA:
Para rifles con enchaquetado que no cuentan con centrador de cañón como rifles de baja gama se recomienda ordenar el Yokozuna en un calibre mayor al de su rifle. Ejemplo: Si su rifle es calibre .25 favor de ordenar calibre .30.
No se aceptan devoluciones ni reclamos.
Yokozuna Spare Baffles
from $ 735.00
Customize the size of your Yokozuna or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up.
*The products on DonnyFL are INTENDED for use on airguns only. It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.for.
