ADAPTADORES

Features: Material is 6061 T6 Aluminum Black anodize Comes with knurled thread protector

The Edgun Matador R3M is one of the most accurate bullpups on the market. Like any gun, the shroud could be improved. This baffle unit replaces the OEM baffles.  Unscrew the factory unit and screw on this one the same way. It was important to keep the rear bolt to help tension the barrel. I've added more vent holes in the rear to allow more air to flow to the rear of the shroud. At the tip of the unit there is now a built in 1/2 x 20 adapter with a knurled thread protector.  Features: Made of steel for durabilityCompatible with .22 and .25fits Standard, Compact and Long MatadorsCNC machinedComes with Knurled capIncludes O-ring

Features:  Made by CNC for accuracy Material is 6061 T6 Aluminum Matte black anodize Diamond pattern knurling for easy grip Compatible with .22 to .30 cal. JTS Airguns .22 to .25 cal.

Note* for Winchester 70-35, if your gun did not come with a factory suppressor, use this adapter. If it did come with a factory suppressor we would have to make a custom adapter. Features:  Made by CNC for accuracy Material is 6061 T6 Aluminum Matte black anodize Diamond pattern knurling for easy grip Compatible with .357 and .45 model

This adapter will extend the shroud past the air tube allowing you to screw on any suppressor with 1/2 x 20 female threads. Female side is M20x1 and male 1/2 x 20. Features: Matte Black anodize Knurled thread protector 95mm long

Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Matte Black anodize Knurled thread protector

Note: If you need a shroud extender for your 600mm FX Impact to work with the Saber Tactical TRS rail, you'll need this adapter: A101 This adapter is for Impacts and Wildcats that have the M20x1 male threaded end. It will screw onto your factory shroud and allow you to screw on an LDC with a 1/2 x 20 UNF Female threads. Features: Made by CNC for accuracy Material is 6061 T6 Aluminum Matte Black anodize Knurled thread protecton

This adapter adds .75 inches to the FX shroud. Female 1/2 x 20 to Male 1/2 x 20 Features: 6061 T6 aluminum length .75 inches Includes thread protector Black anodize Weights: 1.5oz 28MM outer diameter

This adapter adds 2.5 inches to the FX shroud. Features: 6061 T6 aluminum length 2.5 inches Includes thread protector Black anodize Weights: 3.7oz 28mm outer diameter

These adapters are for Wildcat shrouds that extend past the air tube and has female threads once you remove the front shroud cap. It is also compatible with FX Royale 400/500, Boss and Whisper. This adapter is Male to Male, one side is M20x1 that goes into the shroud and the other end is 1/2 x 20 UNF. Features Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip *Note if you have a newer Wildcat, this is not the correct adapter. You will need this one instead: https://donnyfl.com/collections/adapters/products/fx-impact-wildcat-1-2-x-20-unf-adapter-matte-finish-with-thread-protector

This shroud extension is for shrouds that sits behind the lower air tube. Female side is M20x1 and male 1/2 x 20. Features Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize 44mm long

*Please note: Take the front cap off your shroud, measure the outer diameter of the threads on the cap. If close to 1.4 inches, use this adapter. Features:  Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

This adapter allows you to screw on an airgun suppressor with 1/2 x 20 threads.  I recommend going with the Ronin 1/2 x 20 with this gun. I have it installed on my personal gun and it works flawlessly. However, results may vary and might need modification to work in semi auto mode. This gun is similar to the Bullmaster and others have been able to fix the issue by replacing the spring. Go to your hardware store and look for a lighter spring. I got mine from Ace hardware and it fixed the magazine indexing issue. Features:  Compatible up to .30 caliber Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

Este adaptador le permite atornillar un supresor de pistola de aire comprimido con roscas M18x1.  Características:  Compatible hasta calibre .30 Fabricado por CNC para mayor precisión. El material es aluminio 6061 T6 Anodizado negro Moleteado con patrón de diamante para un fácil agarre

1/2 x 20 UNF adapter for those rapid firing Bullmaster. New and improve design to allow more air flow. Please note that when you add a suppressor to this gun, it does not properly index the magazine. It uses blowback air to advance the magazine however with a suppressor on, it over rotates and causes it to not properly index. If you plan to single load it'll work fine. Some customers have been able to get the gun to work properly by swapping out the spring inside the shroud with a different strength one. Will take trial an error. Similar to the Blitz, this guy may need a lighter spring to work with a suppressor. I got mine from Ace hardware. See picture Features:  Compatible up to .30 caliber Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

Key Features: Double-Sided Male Adapter: Specifically designed for Hatsan Jet 1 and Hatsan Jet 2 airguns. Easy Installation: Features through holes in the threads for easy tightening or loosening. High-Quality Construction: Matte black anodized threads ensure durability and a sleek appearance. Precise Dimensions: Outer diameter of .655 inches (16.6 mm).

Features: Compatible with .45 and .50 caliber Made of steel  M18x1 threads compatible with Emperor with M18x1 endcap Comes with black anodized Aluminum thread protector Adapters are tight fit and has four set screws (M4) to help secure it onto the barrel Uses 2mm hex keys for set screws

If you have a Hatsan Bully .25/.30- based on customer's feedback, I would go with the Emperor.  *We have not had any success with customers using a suppressor on Hatsan's line up of semi auto guns. It causes the gun to not index properly. Features: Matte black Anodized CNC Includes knurled thread protector Compatible up to .30 Compatible with the following guns: Hatsan GladiusHatsan Flash Wood QEHatsan AirMaxHatsan Bullboss QEHatsan BT65 QEHatsan Nova QEHatsan AT44-10 QEHatsan Hercules QEHatsan Flashpup QEHatsan AT P1Hatsan Flash QE  

Features: Matte black Anodized CNC Includes knurled thread protector Compatible for the .357 and .457 model  

Features:  Made by CNC for accuracy Material is 6061 T6 Aluminum Grey anodize Diamond pattern knurling for easy grip Compatible with .22 and .25 calibers